Genta G., Tires, Automobile, Encyclopedia of Composites, Wiley, New York, to be published.

G. Genta, A. Genta, Preliminary Assessment of a Small Robotic Rover for Titan Exploration, Acta Astronautica, Vol. 68, n. 5-6, March-April 2011, p. 556-566

G. Genta, C. Feng, A. Tonoli, Dynamics behavior of rotating bladed discs: A finite element formulation for the study of second and higher order harmonics, , Journal of Sound and Vibration, Vol. 239, n. 25, Dec. 2010, p, 5289-5306

A. Della Torre, A. Ercoli Finzi, G. Genta, F. Curti, L. Schirone, G. Capuano, A. Sacchetti, I. Vukman, F. Mailland, E. Monchieri, A. Guidi, R. Trucco, I. Musso, C. Lombardi, The Conceptual Design Of The Team Italia Amalia Mission Rover, Candidate For Google Lunar X Prize Challenge, Acta Astronautica, 2010, Vol. 67, n. 7-8, Oct..-Nov. 2010, p. 961-978

Genta, N. Amati, Hysteretic Damping in Rotordynamics: An Equivalent Formulation, Journal of Sound and Vibration, Vol. 329, n.22, Oct. 2010, p. 4772-4784

G. Genta, Robotic Platforms for the Exploration of Outer Solar System Bodies, Journal of the British Interplanetary Society, Vol. 61, No. 8, Aug. 2008.

G. Genta, M. Rycroft, Will space actually be the final frontier of humankind?, Acta Astronautica, Vol. 58, 2006, pp. 287-295.

G. Genta , The challenge of very deep space exploration: how far will be the frontier?, Journal of the British Interplanetary Society, Vol. 59, n. 2, 2006, pp. 43-47.

G. Genta , On a Persisting Misunderstanding on the Role of Hysteretic Damping in Rotordynamics, Journal of Vibration and Acoustics, Vol. 126, July 2004, 469-471.

G. Genta , On the Stability of Rotating Blades Arrays, Journal of Sound and Vibration, 273, 2004, pp. 805-836.

G. Genta , N. Amati, Mobility on Planetary Surfaces: May Walking Machines be a Viable Alternative?, Planetary and Space Science, 52, 2004, pp. 31-40.

E. Brusa, C. Delprete, G. Genta, Second Approximation Structural Assessment of the Aurora Solar Sail Spacecraft, Acta Astronautica, Vol. 54, 2003, pp. 115-125..

S. Carabelli, G. Genta, M. Silvagni, A. Tonoli, Inertia Wheel on Low-Noise Active Magnetic Suspension, Space Technology, Vol. 23, n. 2-3, pp. 105-117, 2003.

 G. Genta, N. Amati, Non-Zoomorphic versus Zoomorphic Walking Machines and Robots: a Discussion, European Journ. Mech. & Env. Eng., Vol. 47, n. 4, 2002, pp. 223-237.

N. Amati, G. Genta, L.M. Reyneri, Three Rigid Frames Walking Planetary Rovers: a New Concept, Acta Astronautica, Vol. 50, n. 12, pp. 729-736, 2002

G. Genta, G. Vulpetti, Some Considerations on Sun Gravitational Lens Missions, Journal of the British Interplanetary Society,  Vol. 55, n. 3/4, 2002, pp. 131-136.

J.T. Sawicki, G. Genta, Modal Uncoupling of Damped Gyroscopic Sistems, Journal of Sound and Vibration, Vol. 244, n. 3, pp. 431-451, 2001.

S. Carabelli, C. Delprete, G. Genta, M. Muzzarelli, S. Zanolli, Passive Repulsive MagLev: Concept and Experimental Demonstration, Vehicle System Dynamics, Vol. 34, n.5 (2000), pp.  333-356.

N. Amati, M. Chiaberge, G. Genta, E. Miranda, L.M. Reyneri, WALKIE 6 – A Walking Demonstrator for Planetary Exploration, Space Forum, Vol. 5, n.4 (2000), p. 259-277.

G. Genta, E. Brusa, On the Role of Nonsynchronous Rotating Damping in Rotordynamics, Int. Journ. of Rotating Machinery, Vol. 6, n. 6, pp. 467-475, 2000.

N. Amati, M. Chiaberge, G. Genta, E. Miranda, L.M. Reyneri, WALKIE 6 - A Walking Rover Demonstrator for Planetary Exploration, Clawar News, n. 5, Aug. 2000.

G. Genta, Twin Rigid-Frames Hexapod Rovers for the Saha Radioastronomic Missions, Advances in Space Res., Vol. 26, No. 2, pp. 351-357, 2000.

G. Genta, C. Delprete, D. Rondano, Passive Magnetic Levitation: Possible Stable Configurations due to Gyroscopic Effect, Meccanica, Vol. 34, n. 6, pp. 411-424, 1999.

G. Genta, C. Delprete, E. Brusa, Some Considerations on the basic assumptions in rotordynamics, Journal of Sound and Vibration, Vol. 227, n.3, Oct. 1999, pp. 611-645.

E. Brusa, C. Delprete, G. Genta, FEM Structural Assessment of the Aurora Solar Sail Spacecraft, Space Forum, Vol. 4, 1999, pp. 257-277.

G. Genta, E. Brusa, The Aurora Project: a New Sail Layout, Acta Astronautica, Vol. 44, n. 2-4, pp. 141-146, 1999

G. Genta, E. Brusa, The Parachute Sail with Hydrostatic Beam: a New Concept for Solar Sailing, Acta Astronautica, Vol. 44, n. 2-4, pp. 141-146, 1999

N. Amati, M. Chiaberge, G. Genta, E. Miranda, L.M. Reyneri, Twin Rigid-Frames Walking Microrovers: a Perspective for Miniaturization, Journal of the British Interplanetary Society, Vol. 52, n. 7/8, 1999, pp. 301-304.

E. Brusa, G. Genta, Fast-Spinning Multibody Spacecrafts Seen as Free Rotors: Stability Considerations, Space Forum, vol.2, pp. 319-344.

S. Carabelli, C. Delprete, G. Genta, Rotor on Active Magnetic Suspension: Part I: Theoretical Considerations, European Journal Mech. Eng., Vol. 43, n. 3, p. 123-128. 

A.M. Nobili, D. Bramanti, G. Genta et al., Proposed noncryiogenic, nondrag-free test of the equivalence principle in space, New Astronomy, 3, 1988, pp. 175-218.

G. Genta, A. Tonoli, A Harmonic Finite Element for the Analysis of Flexural, Torsional and Axial Rotordynamic Behaviour of Bladed Arrays, Journal of Sound and Vibration, 207(5), 1997, pp. 693-720.

S. Carabelli, C. Delprete, G. Genta, Orbital tubes, Meccanica, 32, 1997, pp. 485-492. 

B. Bona, F. Maddaleno, G. Genta et al., The mechatronics lab. of Politecnico di Torino, Mechatronics, Vol. 7, n. 5, 1997, pp. 413-427.

 E. Brusa, C. Delprete, G. Genta, Torsional Vibration of Crankshafts; Effects of Nonconstant Moments of Inertia, Journal of Sound and Vibration, 205(2), 1997, pp. 135-150.

E. Brusa, Del prete C., D. Franchin, G. Genta, Analisi dinamica torsionale dell’albero a gomiti di un motore aeronautico, Organi di Trasmissione, 28, n.4, April 1997, pp.92-96.

G. Genta, A. Tonoli, A Harmonic Finite Element for the Analysis of Flexural, Torsional and Axial Rotordynamic Behaviour of Discs, Journal of Sound and Vibration, 196(1), 1996, pp. 19-43.

G. Genta, D. Bassani, C. Delprete, DYNROT: A finite element code for rotordynamic analysis based on complex co-ordinates, Engineering Computations, Vol. 13, n. 6, 1996, pp. 86-19.

G. Genta, Dynamic Design, European Journal of Mechanical Engineering, Vol. 40, n. 3, 1995, pp. 132-138.

D. Bassani, G. Genta, Use of genetic algorithms in the design of rotors, Meccanica, 30, 1995, pp. 707-717.

A.M. Nobili , D. Bramanti, G. Genta et al., Galileo Galilei Flight Experiment on the Equivalence Principle with Field Emission Electric Propulsion, The Journal of Astronautical Science, Vol. 43, n. 3.

G. Genta, C. Delprete, Acceleration Through Critical Speeds of an Anisotropic, Nonlinear, Torsionally Stiff Rotor with Many Degrees of Freedom, Journal of Sound and Vibration, 180(3), 1995.

F. Abbattista, R. Albanese, C. Delprete, G. Genta et al.,  Advances in Melt Processed HTSC Applications at Politecnico di Torino, Il Nuovo Cimento, Dec. 1994, pp. 2087-2093.

C. Delprete, G. Genta, B. Bona, S. Carabelli, Rotore a sospensione elettromagnetica a cinque assi attivi, Automazione e strumentazione, Oct. 1994, pp 103-109.

 S. Carabelli, C. Delprete, G. Genta, Grazie alla meccatronica – Automazione più informatica più elettronica più meccanica per il progetto di un rotore a sospensione elettromagnetica a cinque assi attivi, Progettare, n. 169, June 1994, pp 68-75.

G. Genta, C. Delprete, Some  Considerations on  the  experimental determination of moments of inertia, Meccanica, Vol. 29, 1994, pp. 125-141.

G. Genta, C. Delprete, A. Tonoli, R. Vadori, Conditions for Noncircular Whirling of Nonlinear Isotropic Rotors, Nonlinear Dynamics, Vol.4, 1993, pp. 153-181.

G. Genta, A Fast Modal Technique for the Computation of the Campbell Diagram of Multi-Degrees of Freedom Rotors, Journal of Sound and Vibration, 155(3), 1992.

P.M. Calderale, G. Cornacchia, G. Genta, E. Pellegrino, Studio di una metodologia per l'ottimizzazione della sospensione motore, ATA, n. 4, April 1991.

G. Genta, F. De Bona, Unbalance Response of Rotors: a Modal Approach with some Extensions to Damped Natural Systems, Journal of Sound and Vibration, 140,1, pp. 129-153.

G. Genta, Some Considerations on the Constant Stress Disc Profile, Meccanica, vol. 24, 1989, pp. 235-248.

G. Genta, Progettazione di un accumulatore di energia a volano per autobus urbano ibrido, ATA, n. 10, Oct. 1989.

G. Genta, P. Campanile, An Approximated Approach to the Study of Motor Vehicle Suspensions with Nonlinear Shock Absorbers, Meccanica, Vol. 24, 1989, pp. 47-57.

G. Genta, Whirling of Unsymmetrical Rotors, a Finite Element Approach Based on Complex Coordinates, Journal of Sound and Vibration, 124(1), 1988, pp. 27-53.

G. Genta, A. Gugliotta, A Conical Element for Finite Element Rotor Dynamics, Journal of Sound and Vibration, Febr. 1988, 120, pp.175-182.

C. Ferrero, C. Marinari, G. Genta, C. Ronco, Experimental Study of the Stress Distribution in the Spokes of Bare Filament Flywheels, Composites, vol. 16, n. 4 , Oct. 1985.

G. Genta, Consistent Matrices in Rotor Dynamics, Meccanica, vol. 20, 1985, pp. 235-248.

G. Genta, A. Gugliotta, G. Brussino, Un codice di calcolo per l'analisi dinamica dei rotori, Il progettista industriale, July-Aug. 1984.

G. Genta, A. Gugliotta, G. Brussino, Determinazione delle velocita' critiche flessionali e tracciamento del diagramma di Campbell di rotori mediante modelli a parametri concentrati, Il progettista industriale, April 1984.

G. Genta, On the design of Composite Material Thick Rim Flywheels Built by Filament Winding, Composites, vol.15, n.1, Jan. 1984.

C. Ferrero, G. Genta, C. Marinari, Experimental Strain Measurements on Bare Filament Flywheels, Composites, vol.14, Oct. 1983.

G. Genta, Shape of a Wire in a Centrifugal Field - Application to Quasi Circular Bare Filament Flywheels, Journal of Vibration, Stress & Reliability in Design, April 1983.

G. Genta, M.M. Gola, A. Gugliotta, Stress Field in Orthotropic Accelerating Discs, Journal of Applied Mechanics, Sept. 1982.

G. Genta, Spin Tests on Medium Energy Density Flywheels, Composites, Jan. 1982.

G. Genta, M.M. Gola, A. Gugliotta, Axisymmetrical Computation of the Stress Distribution in Orthotropic Rotating Discs, Int. Journ. of Mech. Science, vol.24,n.1, pp.21-26, Jan. 1982.

 G. Genta, M.M. Gola, The Stress Distribution in Rotating Orthotropic Disks, Journ. of Appl. Mech., vol. 48, Sept. 1981.

G. Genta, The Shape Factor in Composite Material Filament – Wound Flywheels, Composites, April 1981.

G. Genta, Design and Construction of a Spin Test Facility for High Energy Density Flywheels, Italian Machinery and Equipment, n.57, May 1980.

G. Belingardi, G. Genta, Stato di tensione e stato di deformazione piano in dischi rotanti ortotropi soggetti a variazione di temperatura, ATA, April 1980.

G. Genta, Progettazione e realizzazione di una attrezzatura di prova per volani ad elevata  densita' di  energia, Quaderni  di Ricerca  e Progettazione, Ingegneria Meccanica, n. 12, 1979.

G. Belingardi, G. Genta, M.M. Gola, A Study of the Stress Distribution in Rotating Orthotropic Discs, Composites, April 1979.

 G. Genta, M.M. Gola, Whirl and Critical Speeds of Flywheel - Container Systems Aboard Vehicles, Meccanica, vol. 14, n.1, March 1979.

G. Belingardi, G. Genta, M.M. Gola, Optimization of Orthotropic Multilayer Cylinders and rotating disks, L'Aerotecnica - Missili e spazio, n.4, Dec. 1977.

G. Belingardi, G. Genta, Generalizzazione del metodo di Manson per il calcolo di corpi a simmetria cilindrica in parete spessa in materiale ortotropo assialsimmetrico non lineare, La Meccanica Italiana, n.108, June 1977.

G. Belingardi, G. Genta, Sul comportamento di dischi di  uniforme resistenza realizzati in laminato quasi isotropo, L'Aerotecnica – Missili e spazio, n.8, 1976.

G. Genta, Considerazioni sull'impiego dei ferrofluidi nell'ingegneria meccanica, Quaderni di Ricerca e Progettazione, Ingegneria Meccanica, n.6, 1976.

G. Genta, Proposta di utilizzazione degli accumulatori di energia cinetica per  l'alimentazione  degli  endoreattori  a  propellenti  liquidi, L'Aerotecnica - Missili e spazio, n.6, 1976.

G. Genta, Utilizzazione degli accumulatori di energia cinetica su veicoli urbani di superficie, ATA, April 1976.

 P.M. Calderale, G. Genta, Accumulatori di energia, crisi energetica e ambiente, ATA, March 1976.

G. Genta, Calcolo dell'orbita di parcheggio per un trasferimento orbitale a propulsione solare - elettrica tra orbite circolari, L'Aerotecnica - Missili e Spazio, n.3, 1974.

G. Genta, P. Campanaro, Ottimizzazione di un convertitore termoelettrico a radioisotopi (RTG) per la produzione di energia elettrica a bordo di satelliti, Rivista di Ingegneria, n.3/4 1974.

G. Genta, Variazione del piano orbitale durante un trasferimento orbitale a propulsione elettrica, L'Aerotecnica - Missili e Spazio, n.4, 1973.

G. Genta, Traiettoria di un veicolo a propulsione solare elettrica passante nel cono d'ombra di un corpo celeste, L'Aerotecnica - Missili e Spazio, n.2, 1973.

G. Genta, E. Chirone, Disegno automatico mediante elaboratori elettronici da tavolo, Ingegneria Meccanica, Febr. 1973

Feng Chen, G. Genta, Guang Zhao, Dynamic Modelling Of Wheeled Planetary Rovers, 2011 Int. Conf. on Electronic & Mechanical Engineering and Information Technology, Harbin, Heilongjiang, China, Aug. 2011, IEEE CFP1124N-PRT ISBN: 978-1-61284-085-7.

M Augelli, G F Bignami, G Genta, Project 242: Fission Fragments Direct Heating for Space Propulsion – Programme Synthesis and Applications to Space Exploration, VII IAA Symposium on Near Term Advanced Space Missions, Aosta, July 2011.

G. Genta, Simplified Model of a Small Planetary Rover With Active Suspensions, VII IAA Symposium on Near Term Advanced Space Missions, Aosta, July 2011

G. Genta, The Development of New Technologies as a Pre-requisite for Deep Space Exploration, VII IAA Symposium on Near Term Advanced Space Missions, Aosta, July 2011

G. Genta, Is the Development of New Technologies a Pre-requisite for Effective Space Exploration?, 3rd Int. Conf. on Advanced Space Technologies, Dnepropetrovsk, Ukraine, April 2011

G. Genta, Directional control of wheeled multibody rovers, Atti dell’ Accademia delle Scienze di Torino, To be published.

G. Genta, N. Amati, L. Altieri, Inerter effect of rotative electromagnetic shock absorbers, Atti dell’ Accademia delle Scienze di Torino, To be published.

G. Genta,. C. Feng, A. Tonoli, Second and Higher Order Harmonic Finite Elements for the Study of the Dynamics of Bladed Discs, Atti dell’ Accademia delle Scienze di Torino, To be published.

G. Genta,. Conventional and slip steering for multi-wheel planetary rovers, Atti dell’ Accademia delle Scienze di Torino, To be published.

G. Genta, Study of the Lateral Dynamics of a Large Pressurized Lunar Rover: Comparison Between Conventional and Slip-Steering, 61^st International Astronautical Congress, Prague, October 2010.

G. Genta, Dynamic Modelling of a Wheeled Lunar Microrover, 61^st International Astronautical Congress, Prague, October 2010.

A. Tonoli, A. Bonfitto, G. Genta, M. Silvagni, H. Bleuler, Selfsensing Active Magnetic Dampers for vibration control, Twelfth International Symposium on Magnetic Bearings (ISMB12), Wuhan, Aug. 2010

A. Della Torre, A. Ercoli Finzi, G. Genta, F. Curti, L. Schirone, G. Capuano, A. Sacchetti, I. Vukman, F. Mailland, E. Monchieri, A. Guidi, R. Trucco, I. Musso, C. Lombardi, The Conceptual Design Of The Team Italia Amalia Mission Rover, Candidate For Google Lunar X Prize Challenge, 60^th  International Astronautical Congress, Daejeon, September 2009.

G. Genta, A. Genta, Modeling and Nonlinear Analysis of an Elastic Wheel for Low-Gravity Applications, XXXVIII Conv. Naz. AIAS, Torino, September 2009.

G. Genta,. A. Genta, A small robotic rover for titan exploration: part 2: Strategies for trajectory control, VI IAA Symposium on Near Term Advanced Space Missions, Aosta, July 2009.

G. Genta,. A. Genta, A small robotic rover for titan exploration: part 1: general layout, VI IAA Symposium on Near Term Advanced Space Missions, Aosta, July 2009.

G. Genta,. The nuclear renaissance: from the power industry to space exploration?, VI IAA Symposium on Near Term Advanced Space Missions, Aosta, July 2009.

G. Genta , B. Bona, N. Amati, F. Impinna  A Demonstrator of a Wheeled Rover for Lunar Exploration and Exploitation, Workshop Robotica per esplorazione lunare unmanned, July 2009, Roma.

G. Genta, X. De Lépine, F. Impinna, J. Girardello, N. Amati, A. Tonoli, Sensitivity analysis of the design parameters of electrodynamic bearings, IUTAM Symposium on emerging trends in rotordynamics, New Delhi, March 2009, Springer, ISSN 1875-3507, ISBN 978 94 007 0019 2.

G. Genta, Dynamic modelling of rotors: a modal approach, IUTAM Symposium on emerging trends in rotordynamics, New Delhi, March 2009, Springer, ISSN 1875-3507, ISBN 978 94 007 0019 2..

G. Genta,. A. Genta, An elastic wheel for low-gravity applications, Atti dell’ Accademia delle Scienze di Torino, Serie V, Vol. 33, p. 27-69, 2008.

I. Vukman, E. Vallerani, G. Genta, A. Della Torre, E. Monchieri, F. Mailland, Lunar Surface Mobility System Resulting From the ESA Study on Surface Architectures for European Space Exploration, 58^th  International Astronautical Congress, Glasgow, September 2008.

G. Genta, Present and Future Trends in Rotordynamic Aanalysis, 9th International Conference On Vibrations In Rotating Machinery, Exeter, September 2008.

G. Genta, Time-Domain Simulation of Rotors with Hysteretic Damping, 9th International Conference On Vibrations In Rotating Machinery, Exeter, September 2008.

G. Genta, A. Festini, X. Delepine, From Oil to Magnetic Fields: Active and Passive Vibration Control, 4th Conference Mechatronic Systems and Materials 2008, Bialystok, July 2008.

G. Genta, N. Amati, B. Bona, F. Impinna, M. Kaouk, C. Pristerà, G. Romeo, Mobile teleoperated manipulator for difficult and hazardous environments, Atti dell’ Accademia delle Scienze di Torino, 2008.

G. Genta, N. Amati, On the equivalent viscous damping for systems with hysteresis, Atti dell’ Accademia delle Scienze di Torino, 2008.

Venditti F., Vallerani E., Genta G., Innovative Surface Elements for Space Exploration: a Lunar Tractor and its Family of Trailers, 57^th  International Astronautical Congress, Hyderabad, September 2007.

Genta G., Amati N., Bonfitto A., Carabelli S., Impinna F., A Wheeled Robot for Lunar Environment: Design, Modelling and Construction, 57^th  International Astronautical Congress, Hyderabad, September 2007.

G. Genta, Robotic rovers for long range exploration, V IAA Symposium on Near Term Advanced Space Missions, Aosta, July 2007.

Amati N, Genta G; Wheeled Rovers: Basic Mobility Considerations, 2nd International Workshop on Exploring Mars and its Earth Analogues, Trento, June 2007.

G. Genta, Vehicles for Robotic and Manned Planetary Exploration, Accepted at 57th International Astronautical Congress, Valencia, September 2006.

Amati N.; Carabelli S; Genta G; Macchi P; Silvagni M; Tonoli A; M. Visconti, Semi-active electromagnetic dampers for the dynamic control of rotors. 7th IFToMM Conference on Rotor Dynamics, Wien,  September 2006,  pp. 1-10. ISBN: 3-200-00689-7

S. Carabelli, A. Tonoli, M. Silvagni, P. Macchi, M. Visconti, G. Genta, N. Amati, Active Magnetic Dampers (AMD) for the Dynamic Control of Rotors, Accepted at 7th IFToMM Conference on Rotor Dynamics, Vienna, September 2006.

Amati N.; Carabelli S; Genta G; Macchi P; Silvagni M; Tonoli A., More electric aero engines: trade-off between different electromagnetic dampers and supports.  ISMB 9, Martigny, Switzerland. August 18-20, 2006. pp. 1-10.

G. Genta, N. Amati, Oil Whip and Unstable Whirling in Anisotropic Rotors on Lubricated Bearings, Accepted at ESDA2006, 8th Biennial ASME Conference on Engineering Systems Design and Analysis, July, 2006, Torino.

G. Genta, Design of Planetary Exploration Vehicles, Accepted at ESDA2006, 8th Biennial ASME Conference on Engineering Systems Design and Analysis, July, 2006, Torino.

G. Genta, A. Tonoli, N. Amati, M. Silvagni, Vibration Control of Rotors; Tradeoff between Active, Semiactive and Passive Solutions, FMD 2006, Lappeenranta, June 2006.

G. Genta, M. Silvagni, Some Considerations on Cyclic Symmetry in Rotordynamics, ISCORMA-3, Cleveland, September 2005.

G. Genta, The Beauty of Rotordynamics, ISCORMA-3, Cleveland, September 2005.

G. Genta, N.Amati, A. Repaci Chaotic Behavior of Rotors on Lubricated Bearings, ISCORMA-3, Cleveland, September 2005.

G. Genta, The challenge of very deep space exploration: how far will be the frontier?, IV IAA Symposium on Near Term Advanced Space Missions, Aosta, July 2005.

G. Genta, M.A. Perino, Teleoperation Support for Early Human Planetary Missions, New Trends in Astrodynamics and Applications II, Princeton, June 2005.

N. Amati, B. Bona, S. Carabelli, M. Chiaberge, G. Genta, M. Padovani, R. Volpe, WALKIE 6.4: A New Improved Version Of A Rigid Frames Hexapod Rover, CLAWAR 04, Madrid, Sept. 2004.

187

B. Bona, S. Carabelli, M. Chiaberge, O. Wolley, G. Genta, N. Amati, A. Canova, Hybrid wheel-legs moving robot: proposal of a new configuration, MECHROB 04, Aachen, Sept. 2004.

186

B. Bona, S. Carabelli, M. Chiaberge, O. Wolley, G. Genta, N. Amati, A. Canova, Hybrid wheel-legs locomotion: simplified mechanical and control architectures for realistic, near term, moving robots, MECHROB 04, Aachen, Sept. 2004.

185

G. Genta, N.Amati, Geometrical Coupling Between Axial and Radial Dynamics of AMB, 9th Int. Symp. On Magnetic Baearings, Lexinton, Aug. 2004.

184

N.Amati, B. Bona, A. Canova, S. Carabelli, M. Chiaberge, G. Genta, Light Hybrid Robotic Platform for Humanitarian Demining, HUDEM 04, Bruxelles, June, 2004.

183

G. Genta, M. Rycroft, Will Space Actually Be the Final Frontier of Humankind?, 54th Int. Astronautical Congress, Bremen, Oct. 2002

182

G. Genta, M. Chiaberge, N. Amati, C. Sansoè, P. Rolando, M. Padovani, Navigation Tools for Autonomous Walking Rovers Operating in Hazardous Environments, CLAWAR 2003, Catania, Sept. 2003.

181

G. Picco, G. Genta, P. Galeotti, D. Noventa, Proposing a United Nations Secretary General SETI International Advisory Board, 7th Trieste Conference on Chemical Evolution and the Origin of Life: Life in the Universe, Trieste, Sept. 2003.

180

G. Genta, Some Engineering Considerations on the Controversial Issue of Humanoids, 7th Trieste Conference on Chemical Evolution and the Origin of Life: Life in the Universe, Trieste, Sept. 2003.

179

Silvagni M., Genta G., Tonoli A., Genta G., Non-Axisymmetrical 3D Element for FEM Rotordynamics, ISCORMA-2, Gdańsk, Poland, 4-8 August 2003.

178

Genta G., On the Role of Damping on the Dynamics of Rotating Blades, ISCORMA-2, Gdańsk, Poland, 4-8 August 2003

177

Genta G., Numerical Modelling and Simulation in Rotordynamics, ISCORMA-2, Gdańsk, Poland, 4-8 August 2003

176

F. Maddaleno, M. Chiaberge, C. Damilano, G. Genta, A FPGA Based High Efficiency Transconductance Amplifier for AMB, ISCORMA-2, Gdańsk, Poland, 4-8 August 2003.

175

 Genta G., Chiaberge M., Amati N, An Autonomous Walking Robot for Operation on Irregular Surfaces, Robotics and Mems  for Vehicle systems, Rome, June 2003,

174

Genta G., Dynamic Behaviour of an Array of Rotating Pendulums, Atti dell’ Accademia delle Scienze di Torino, 2003

173

Genta G., On the Controversial Issue of Humanoids: a Mechanical Engineer’s Viewpoint, Atti dell’ Accademia delle Scienze di Torino, 2003

172

Brusa E., Carabelli S., Genta G, Maddaleno F., Silvagni M., Tonoli A., Voice Coil Actuator for Active Vibration Isolation in Microgravity, 53th Int. Astronautical Congress, Houston, Oct. 2002.

171

 Carabelli S., Genta G, Silvagni M., Tonoli A., Inertia Wheel on Low-Noise Active Magnetic Suspension, 53th Int. Astronautical Congress, Houston, Oct. 2002

170

Genta G., Amati N, Performance of twin rigid frames walking rover on uneven ground: simulation and experimental tests, CLAWAR 2002, Paris.

169

Genta G., Amati N, Mobility on Planetary Surfaces: May Walking Machines be a Viable Alternative?, Exploring Mars and its Earth Analogues, Catania, September 2002.

168

Genta G., Amati N, Walking Machines and Robots: is Present Technology Able to Imitate Nature?, Atti dell’ Accademia delle Scienze di Torino, 2002.

167

Genta G., Somma R., Non-Zoomorphic Walking Machines for Planetary Exploration and Exploitation, International Workshop Futuristic Space Technologies , May 2002, Padriciano, Trieste

166

G. Genta, M. Chiaberge, N. Amati, Non Zoomorphic Rigid Frame Walking Micro-Rover for Uneven Ground: from a Demonstrator to an Engineering Prototype, International Conference on Smart Technology Demonstrators & Devices, Edimbourgh, Dec. 2001

165

G. Genta, N. Amati, Planar Motion Hexapod Walking Machines: a New Configuration, CLAWAR 2001, Professional Engineering Publishing, London, 2001.

164

E. Brusa, S. Carabelli, G. Genta, F. Maddaleno, M. Silvagni, A. Tonoli, Voice Coil Actuator for Active Vibration Isolation in Microgravity, 6^th  ISMST, Torino, October 2001.

163

S. Carabelli, G. Genta, M. Silvagni, A. Tonoli, Active Magnetic Suspension for Satellite Inertia Wheels, 2^nd EUSPEN, Torino, May 2001.

162

E. Brusa, S. Carabelli, G. Genta, F. Maddaleno, M. Silvagni, A. Tonoli, Voice Coil Actuator for Active Vibration Insulation in Microgravity, 2^nd EUSPEN, Torino, May 2001

161

G. Genta, The Saha Crater Radioastronomic And Seti Observatory, 6^th Trieste Conference on Chemical Evolution, Trieste, Sept. 2000.

160

G. Genta, S. Carabelli, Noncolocation Effects on the Rigid Body Rotordynamics of Rotors on Active Magnetic Bearings, Seventh Int. Symp. on Magnetic Bearings, Zurich, Aug. 2000.

159

G. Genta, E. Brusa, Rotordynamic Analysis in the Design of Rotating Machinery, Int. Workshop on multidisciplinary design optimization, Pretoria, Aug. 2000.

158

G. Genta, Propulsion for Interstellar Space Exploration, COSPAR Colloquium on the Outer Heliosphere: The Next Frontiers, Potsdam, Germany, July 2000.

157

G. Genta, E. Brusa, Basic Considerations on the Free Vibrational Dynamics of Circular Solar Sails, III IAA Symposium on Near Term Advanced Space Missions, Aosta, July 2000.

156

G. Genta, G. Vulpetti, Some Considerations on Missions to the Solar Gravitational Lens, III IAA Symposium on Near Term Advanced Space Missions, Aosta, July 2000.

155

G. Genta, Interstellar Space Exploration: What is Going on?, III IAA Symposium on Near Term Advanced Space Missions, Aosta, July 2000.

154

G. Genta, S. Carabelli, Noncolocation Effects on Rigid-Body Rotordynamics of Rotors on Active Magnetic Bearings, Int. Conf. On App. of Modal Analysis, Gold Coast, Australia, Dec. 1999.

153

E. Brusa, C. Delprete, G. Genta, On-line Unbalance Analysis for Monitoring and Active Balancing of Rotors, Int. Conf. On App. of Modal Analysis, Gold Coast, Australia, Dec. 1999.

152

A. Argondizza, S. Carabelli, G. Genta, A. Tonoli, Magnetically-Levitated Reaction Wheel for Space Application, 5^th Int. Symp. On Magnetic Suspension Technology, Santa Barbara, Dec. 1999.

151

G. Genta, C. Delprete, E. Brusa, Dynamic behaviour of rotors: a nonlinear model for large displacements and rotations, Atti dell'Accademia delle Scienze di Torino, 1999.

150

G. Genta, C. Delprete, S. Zanolli, D. Fusta, S. Carabelli, F. Profumo, A. Tenconi, G. Gianolio, M. Muzzarelli, A. Argondizza, A. Delmastro, Dimostratore di un veicolo Maglev automotore a due carrelli, IV Conv. Naz. PFT-2, Roma, Nov. 1999.

149

N. Amati, G. Genta, L.M. Reyneri, Three Rigid Frames Walking Planetary Rovers: a New Concept, 50^th Int. Astronautical Congress, Amsterdam, Oct. 1999.

148

G. Genta, N. Amati, C. Delprete, Effetto della geometria degli attuatori elettromagnetici sul comportamento dinamico dei rotori, XXVIII Conv. Naz. AIAS, Vicenza, Sept. 1999.

147

E. Brusa, C. Delprete, G. Genta, Analisi dello squilibrio e procedure di equilibratura in rotori a sospensione magnetica, XXVIII Conv. Naz. AIAS, Vicenza, Sept. 1999.

146

G. Genta, C. Delprete, E. Brusa, Dynamic Behaviour of Free Rotors: a Rotordynamic Approach, EPMESC VII, Macao, Aug. 1999.

145

G. Genta, N. Amati, M. Chiaberge, E. Miranda, L.M. Reyneri, R. Somma, M.A. Perino, An Autonomous Micro-Hexapod Walking Machine for Planetary Exploration, Clawar ’98, Brussels, Nov. 1998.

144

M.A. Perino, L. Bussolino, R. Somma, G. Genta, N. Amati, M. Chiaberge, E. Miranda, L.M. Reyneri, WALKIE 6: An Autonomous Micro-Hexapod Walking Machine for Planetary Exploration, Workshop on Space Exploration and Resources exploitation, Cagliari, Oct. 1998.

143

M.A. Perino, L. Bussolino, R. Somma, G. Genta, N. Amati, M. Chiaberge, E. Miranda, L.M. Reyneri, WALKIE 6: An Autonomous Micro-Hexapod Walking Machine for Planetary Exploration, 49^th Int. Astronautical Congress, Melbourne, Oct. 1998.

142

G. Genta, N. Amati, Prestazioni su terreno accidentato di veicoli esapodi a telai rigidi, XXVII Conv. Naz. AIAS, Perugia, Sept. 1998.

141

G. Genta, C. Delprete,S. Zanolli, M. Burzio, Studio dei moti di sospensione di un veicolo a levitazione magnetica, XXVII Conv. Naz. AIAS, Perugia, Sept. 1998.

140

G. Genta, N. Amati, Performance Evaluation of Twin Rigid-Frames Hexapod Planetary Rovers, Fourth Int. Conf. on Motion and Vibration Control (MoViC), Zurigo, Aug. 1998

139

G. Genta, C. Delprete, S. Zanolli, M. Burzio, Control of the Suspension Motions of a Maglev Vehicle, Fourth Int. Conf. on Motion and Vibration Control (MoViC), Zurigo, Aug. 1998.

138

S. Carabelli, G. Genta, Nonlinear Rotordynamic Behavior of Rotors on Active Magnetic Bearings, Sixth Int. Symp. on Magnetic Bearings, Cambridge, USA, Aug. 1998.

137

R. Vuillemin, B. Aescliman, M. Kummerle, J. Zoethout, T. Belfroid, H. Bleuler, A. Cassat, P. Passeraub, S. Hediger, P.A. Besse, A. Argondizza , A. Tonoli, S. Carabelli, G. Genta, G. Heine, Low Cost Active Magnetic Bearings for Hard Disc Drive Spindle Motors, Sixth Int. Symp. on Magnetic Bearings, Cambridge, USA, Aug. 1998.

136

G. Genta, E. Brusa, The Aurora Project: a New Sail Layout, II IAA Symposium on Near Term Advanced Space Missions, Aosta, June-July 1998.

135

G. Genta, E. Brusa, The Parachute Sail with Hydrostatic Beam: a New Concept for Solar Sailing,  II IAA Symposium on Near Term Advanced Space Missions, Aosta, June-July 1998.

134

M. Chiaberge, G. Genta, E. Miranda, L.M. Reyneri, Twin Rigid-Frames Walking Rovers: a Perspective for Miniaturization, From Microsystems to Nanotechnology for Space Missions, Londra, March 1998.

133

G. Genta, C. Delprete, A. Repaci, Numerical simulation of the dynamic behaviour of rotors on class-B active magnetic bearings, ISROMAC7, Honolulu, Febr. 1998.

132

G. Genta,S. Zanolli, Time domain study of the dynamic stressing of crankshafts, ISROMAC7, Honolulu, Febr. 1998.

131

H. Bleuler, S. Carabelli, G. Genta, R. Mueller, A. Tonoli, FEM based controller design for active magnetic bearings in hard disc drives, ISROMAC7, Honolulu, Febr. 1998.

130

S. Carabelli, C. Delprete, F. Di Majo, G. Genta, S. Zanolli, Passive repulsive maglev concept and experimental demonstration, WCRR, Firenze, Oct. 1997.

129

S. Carabelli, C. Delprete, G. Genta, S. Zanolli, Realizzazione di un dimostratore per un sistema di trasporto a levitazione magnetica, III Conv. Naz. PFT-2, Taormina, Oct. 1997.

128

E. Brusa, C. Delprete, G. Genta, Second approximation  Structural Assessment of the AURORA Solar Sail Spacecraft, 48th Int. Astronautical Congress, Torino, Oct. 1997.

127

E. Brusa, G. Genta, Active Stabilization of a Fast Spinning Multibody Spacecraft, 48th Int. Astronautical Congress, Torino, Oct. 1997.

126

G. Genta, A. Tonoli, Studio del comportamento dinamico di dischi palettati mediante il metodo degli elementi finiti, XIII Congr. Naz. AIMETA, Siena, Sept.-Oct. 1997.

125

E. Brusa, C. Delprete,  G. Genta, Analisi strutturale di  seconda approssimazione della vela solare AURORA, XXVI Conv. Naz. AIAS, Catania, Sept. 1997.

124

G. Genta, S. Zanolli, Sollecitazioni dinamiche negli alberi a gomiti: integrazione numerica delle equazioni del moto nel dominio del tempo,  XXVI Conv. Naz. AIAS, Catania, Sept. 1997.

123

S. Carabelli, C. Delprete, G. Genta, S. Zanolli, Control of a Two Active Axes Suspension for Maglev Vehicles, American Control Conference 97, Albuquerque, June 1997.

122

L. Bussolino, D. Del Corso, G. Genta, R. Somma, M.A. Perino, ALGEN - A Walking Robotic Rover for Planetary Exploration, 1977 Int. Conf. on Mobile Planetary Robots & Rover Roundup, Santa Monica, Jan. 1997.

121

S. Carabelli, F. Cerruti, C. Delprete, F. Di Maio, G. Genta, S. Zanolli, A two Active-axes Suspension for Maglev Vehicles, Int. Conf. on Material Engineering - XXV Conv. Naz. AIAS, Gallipoli, Sept. 1996.

120

G. Genta, E. Brusa, E. Molina, A Simple Demonstrator for Rotordynamics, Int. Conf. on Material Engineering - XXV Conv. Naz. AIAS, Gallipoli, Sept. 1996.

119

G. Genta, E. Brusa, Structural Design and Static Stress Analysis of a Fast Solar Sail Spacecraft, Int. Conf. on Material Engineering - XXV Conv. Naz. AIAS, Gallipoli, Sept. 1996.

118

S. Carabelli, F. Cerruti F., C. Delprete, F. Di Maio, G. Genta, S. Zanolli, A two Active-axes Suspension for Maglev Vehicles, Fifth Int. Symp. on Magnetic Bearings, Kanazawa, Aug. 1996.

117

E. Belbruno, G. Genta, Low Energy Comet Rendezvous Using Resonance Transitions, I IAA Symposium on Realistic Near Term Advanced Scientific Space Missions, Torino, June 1996.

116

G. Genta, E. Brusa, Project Aurora: Preliminary Structural Definition of the Spacecraft, I IAA Symposium on Realistic Near Term  Advanced  Scientific Space Missions, Torino, June 1996.

115

S. Carabelli, B. Bona, C. Delprete, G. Genta, A. Tonoli, Il Laboratorio Interdipartimentale di  Meccatronica  del  Politecnico  di  Torino, Automazione 95, Bari, Nov. 1995.

114

R. Albanese, C. Delprete, G. Genta, A. Mosolov, Passive vibration insulation for microgravity environment using high Tc superconductors, 46th International Astronautical Congress, Oslo, Oct. 1995.

113

C. Delprete, G. Genta, I. Moretto, S. Carabelli, Progettazione  e realizzazione di un rotore su cuscinetti magnetici attivi a geometria conica, XXIV Conv. Naz. AIAS, Parma, Italy, Sept. 1995.

112

D. Bassani, G. Genta, G. Malucchi, Progettazione meccanica di un veicolo elettrico esapode, XXIV Conv. Naz. AIAS, Parma, Italy, Sept. 1995. 

111

E. Brusa, C. Delprete, D. Franchin, G. Genta, Analisi dinamica torsionale dell'albero a gomiti di un motore aeronautico, XXIV Conv. Naz. AIAS, Parma, Italy, Sept. 1995.

110

R. Albanese, C. Delprete, G. Genta, A. Mosolov, R. Negro, Progettazione e realizzazione di una piattaforma per l'isolamento dalle vibrazioni su cuscinetti magnetici a superconduttori ad alta Tc, XXIV Conv. Naz. AIAS, Parma, Italy, Sept. 1995.

109

S. Carabelli, C. Delprete, G. Genta, F. Maddaleno, M. Mittino, M. Ugazio, High efficiency linear power amplifier for active magnetic bearings,  MAG 95, Alexandria, USA, Aug. 1995.

108

S. Carabelli, C. Delprete, G. Genta, I. Moretto, A spindle running on a five axes magnetic suspension based on conical bearings, MAG 95, Alexandria, USA, Aug. 1995.

107

G. Genta, E. Brusa, Numerical Stability Analysis of the GG and GG-FEEP2 Rotating Systems, Galileo  Galilei GG-FEEP2 Second  International Meeting, Pisa, May 1995.

106

G. Genta, E. Brusa, Selfcentring of Supercritical Rotors in Space, Galileo Galilei GG-FEEP2 Second International Meeting, Pisa, May 1995.

105

F. Abbattista, R. Albanese, C. Delprete, G. Genta, R. Gerbaldo, G. Ghigo, L. Gozzelino, E. Mezzetti, A. Mosolov, S. Ronchetti, M. Vallino, Advances in Melt Processed HTSC Applications at Politecnico di Torino, SATT7, Torino, Oct. 1994.

104

G. Genta,  D. Bassani, C. Delprete,  DYNROT: A Matlab toolbox for rotordynamics analysis, Workshop Matlab, Bologna, 14 Oct. 1994.

103

R. Albanese, C. Delprete, G. Genta, A. Mosolov, Modellizzazione matematica e caratterizzazione  sperimentale  di  un  cuscinetto  magnetico a superconduttori ad alta temperatura, XXIII Conv. Naz. AIAS, Rende, Sept. 1994.

102

 D. Bassani, E. Brusa, C. Delprete, G. Genta, A. Tonoli, Calcolo delle sollecitazioni dinamiche negli alberi a gomiti: influenza delle ipotesi semplificative sui risultati, XXIII Conv. Naz. AIAS, Rende, Sept. 1994.

101

D. Bassani, C. Delprete, G. Genta, Ottimizzazione del profilo di dischi rotanti mediante algoritmi genetici, XXIII Conv. Naz. AIAS, Rende, Sept. 1994.

100

C. Delprete, G. Genta, A. Tonoli, S. Carabelli, Effetto del carico radiale sul comportamento dinamico dei cuscinetti magnetici attivi, XXIII Conv. Naz. AIAS, Rende, Sept. 1994.

99

S. Carabelli, C. Delprete, G. Genta, L. Mazzocchetti, Rava E., Design, Construction and Testing of a Turbomolecular Pump with Five Axes Magnetic Suspension, 4-th Int. Symp. on Magnetic Bearings, Zurich, Aug. 1994.

98

S. Carabelli, F. Cerruti, C. Delprete, G. Genta, High Efficiency and Low Cost Power Amplifiers and Transducers for Active Magnetic Bearings, 4-th Int. Symp. on Magnetic Bearings, Zurich, Aug. 1994.

97

S. Carabelli, C. Delprete, G. Genta, Control Strategies for Decentralized Control of Active Magnetic Bearings, 4-th Int. Symp. on Magnetic Bearings, Zurich, Aug. 1994.

96

R. Albanese,  C. Delprete, G. Genta, A. Mosolov, Experimental Characterization and Mathematical Modelling of High-Tc Superconductors for Magnetic Bearings, 4-th Int. Symp. on Magnetic Bearings, Zurich, Aug. 1994.

95

R. Albanese, C. Delprete, F. Frangi F., G. Genta, L. Mazzocchetti, E. Rava, A. Tonoli, S. Zannella, Design, Construction and Testing of a Kinetic Energy Storage Device with High-Tc Superconductive Suspension, 4-th Int. Symp. on Magnetic Bearings, Zurich, Aug. 1994.

94

D. Bassani, G. Genta, A FEM code for rotordynamics based on complex coordinates, WCCM3, Chiba, Japan, Aug. 1994.

93

G. Genta, A. Tonoli, A disc finite element for the study of the flexural behaviour of rotors, WCCM3, Chiba, Japan, Aug. 1994.

92

D. Bassani, G. Genta, Use of genetic algorithms in the design of rotors, WCCM3, Chiba, Japan, Aug. 1994.

91

A. Mosolov, G. Genta, R. Albanese, Melt textured high-Tc superconductors, flux pinning and levitation force: theory and applications, Eighth Cimtec, Firenze, June-July 1994.

90

B. Bona, E. Brusa, P. Canestrelli, G. Genta, A. Tonoli, Finite Element Modelling and Experimental Validation of an Elastic Beam with Surface Bonded Piezoelectric Devices, 1994 IEEE Int. Conf. on Robotic and Automation, San Diego, May 1994.

89

A. Mosolov, G. Genta, R. Albanese, High-Tc Superconductors and the Perspectives of the Construction of Levitation Devices, ICMAS 93, Parigi, Dec. 1993.

88

B. Bona, S. Carabelli, C. Delprete, G. Genta, Progetto e realizzazione di un rotore a sospensione elettromagnetica a 5 assi attivi, Automazione 1993, Milano, Nov. 1993.

87

A. Mosolov, G. Genta, R. Albanese, Experimental and  Theoretical Investigations of Levitation Force and Magnetic Stiffness in High-Tc Superconductors for Magnetic Bearing Application, 6th Int. Symp. on Superconductivity, Hiroshima, Oct. 1993.

86

D. Bassani, C. Delprete, G. Genta, A. Tonoli, Progettazione, realizzazione e prove di un quadrupolo gravitazionale rotante, XXII Conv. Naz. AIAS,  Forlì, Oct. 1993.

85

C. Delprete, G. Genta, Attuatore radiale per sospensione magnetica attiva: progetto e caratterizzazione sperimentale, XXII Conv. Naz. AIAS, Forlì, Oct. 1993.

84

D. Bassani, M. Chiaberge, D. Del Corso, G. Genta, F. Zanetti, Simulation of a Hexapod Walking Machine Controlled by Neural Networks, III Int. Symp. on Measurement and Control in Robotics, Torino, Sept. 1993.

83

B. Bona, E. Brusa, P. Canestrelli, G. Genta, A. Tonoli, A Controlled Beam Element for FEM Simulation of Beams with Piezoelectric Devices, III Int. Symp. on Measurement and Control in Robotics, Torino, Sept. 1993.

82

G. Genta, S. Carabelli, C. Delprete, Active Magnetic Bearing Control Loop Modelling for a Finite Element Rotordynamics Code, II Int. Symp. on Magnetic Suspension Technology, Seattle, Aug. 1993.

81

S. Carabelli, C. Delprete, G. Genta, Design, Construction and Testing of a Five Active-Axis Magnetic Bearing System, II Int. Symp. on Magnetic Suspension Technology, Seattle, Aug. 1993.

80

G. Genta, Disaccoppiamento tra comportamento direzionale e comfort di marcia nei veicoli, Scritti e testimonianze in ricordo A. Lausetti, DIASP, Politecnico di Torino, May 1993, pp. 69-84.

79

G. Genta, D. Bassani, A One Active-Axis Magnetic Suspension Controlled by a Neural Net, II Polish Italian Seminar, Torino, April 1993, pp. 17-24.

78

G. Genta, C. Delprete, A. Tonoli, R. Vadori, Unbalance Response of Nonlinear Rotating Systems, II Polish Italian Seminar, Torino, April 1993, pp. 197-204.

77

G. Genta, C. Delprete, A. Tonoli, Develpment of Magnetic Bearings at the Department of Mechanics of Politecnico di Torino, II Polish Italian Seminar, Torino, April 1993, pp. 9-16.

76

G. Bertolino, G. Genta, A. Gugliotta, IRIS Spin Table Static and Dynamic Analysis and Experimental Tests of Selected Structural Components, II Polish Italian Seminar, Torino, April 1993, pp. 189-196.

75

G. Genta, C. Delprete, A. Tonoli, R. Vadori, Precessione noncircolare di rotori isotropi assialsimmetrici nonlineari,  XI Congr. Naz. AIMETA, Trento, 28 Sept.- 2 Oct. 1992.

74

G. Genta, C. Delprete, L. Santini, A. Tonoli, Studio teorico-sperimentale di una sospensione magnetica a superconduttori ad alta temperatura, XI Congr. Naz. AIMETA, Trento, 28 Sept.- 2 Oct. 1992.

73

G. Genta, C. Delprete, A. Tonoli, Studio teorico-sperimentale di uno smorzatore magnetico passivo, XXI Conv. Naz. AIAS, Genova,  23-26 Sept. 1992.

72

G. Genta, C. Delprete, A. Tonoli, R. Vadori, Unbalance Response of Nonlinear Unsymmetric Rotating Systems, Conference on Vibration in Rotating Machinery, Bath, Sept. 1992.

71

G. Genta, C. Delprete, A. Tonoli, E. Rava, L. Mazzocchetti, Study of the Geometry of a Radial Passive Magnetic Bearing for Application to a Turbomolecular Pump, MAG 92, Alexandria VA, July 1992.

70

C. Delprete,G. Genta, L. Mazzocchetti, E. Rava, A. Ricca, G. Ripamonti, L. Santini, A. Tonoli, E. Varesi, S. Zannella, High Speed Asynchronous Motor with High Tc Superconducting Bearings, III Int. Symposium on Magnetic Bearings, Alexandria VA, July 1992.

69

G. Genta, C. Delprete, A. Tonoli, E. Rava, L. Mazzocchetti, Analytical and Experimental Investigation of a Magnetic Radial Passive Damper, III Int. Symposium on Magnetic Bearings, Alexandria VA, July 1992.

68

G. Genta,  C. Delprete, Alcune  considerazioni sulla  determinazione sperimentale dei momenti d'inerzia, XX Conv. Naz. AIAS,  Palermo, Sept. 1991.

67

G. Genta, F. Vatta, A Lubricated Bearing Element for FEM Rotor Dynamics, Florence Modal Analysis Conference, Firenze, Sept. 1991.

66

G. Genta, C. Delprete, E. Rava, L. Mazzocchetti, Dynamic Analysis and Testing of a High Speed Unsymmetrical Rotor, VIII World Congress IFTOMM, Praga, Aug. 1991.

65

G. Genta, C. Delprete, A. Tonoli, R. Vadori, Introduction to Nonlinear Rotordynamics, Nonlinear Problems in Engineering, Roma, May, 1991.

64

G. Genta, F. Vatta, A Lubricated Bearing Element for FEM Rotor Dynamics, IX IMAC, Firenze, April 1991.

63

G. Genta, Recent Advances in FEM Rotor Dynamics at the Department of Mechanics of Politecnico di Torino, Polish-Italian Seminar, Varsavia, Oct. 1990.

62

G. Genta, Inertial Accumulators in Machine Drive Systems, Polish-Italian Seminar, Varsavia, Oct. 1990.

61

G. Genta, C. Delprete Accelerazione attraverso le velocità critiche di un rotore torsionalmente rigido a molti gradi di libertà, X Congr. Naz. AIMETA, Pisa, Oct. 1990.

60

G. Genta, Tracciamento del diagramma di Campbell di rotori con molti gradi di libertà, X Congr. Naz. AIMETA, Pisa, Oct. 1990.

59

G. Genta, A. Repaci, I. Briacca, Iterative Techniques for Computation of the Unbalance Response of Multi-degrees of Freedom Nonlinear Rotors, III International Conf. Rotordynamics, Lione, Sept. 1990.

58

G. Genta, M. Mijno, C. Ferrero, C. Marinari, An Experimental Study on Residual Stresses in Rotating Discs Plasticized by Overspeeding, IX Int. Conf. on Experimental Mechanics, Copenhagen, Aug. 1990.

57

G. Genta, L. Mazzocchetti, E. Rava, Magnetic Suspension  for  a Turbomolecular Pump, II Int. Symp. on Magnetic Bearings, Tokyo, July 1990.

56

G. Genta, R. Albesiano, A Mathematical Model for Assessing the Driveability of Motorcycles, XXIII FISITA Congress, Torino, May 1990.

55

G. Genta, C. Ferrero, C. Marinari, E. Martino, G. Turone, Rilievo delle tensioni residue in rotori in materiale composito, XVII Conv. Naz. AIAS, Ancona, Sept. 1989.

54

G. Genta, M. Mijno, C. Ferrero, C. Marinari, Residual stresses in Rotating Discs Stressed Beyond the Limit of Elasticity: an Experimental Study, ICAM 89, Beijing, Aug. 1989.

53

G. Genta, F. De Bona, A Modal Approach to the Dynamic Study of Rotors, ICAM 89, Beijing, Aug. 1989.

52

G. Genta, F. De Bona, Calcolo della risposta allo squilibrio di rotori a molti gradi di libertà mediante analisi modale, IX Conv. Naz. AIMETA, Bari, 4-7 Oct. 1988.

51

G. Genta, Progettazione di un accumulatore di energia a volano per autobus urbano ibrido, Convegno del progetto finalizzato trasporti, Napoli, 21-23 Sept. 1988.

50

G. Genta, G. Pasquero, Prove preliminari su anelli di contenimento sollecitati dall'esplosione di rotori metallici, XVI Conv. Naz.  AIAS, L'Aquila, 20-24 Sept. 1988.

49

G. Genta, F. De Bona, A. Tonoli, Calcolo della risposta allo squilibrio di rotori nonlineari. Un approccio modale, XVI Conv. Naz. AIAS, L'Aquila, 20-24 Sept. 1988.

48

Widmer J., G. Genta, P. Von Burgh, H. Asper, Prediction of the Dynamic Behaviour of a Flywheel Rotor System by FE Method, XXIII I.E.C.E.C., Denver, 31 July-3 Aug. 1988.

47

G. Genta, Dynamic Study of a Kinetic Energy Storage System for a Hybrid bus, XXIII I.E.C.E.C., Denver, 31 July-3 Aug. 1988.

46

G. Genta, A. Repaci, Circular Whirling and Unbalance Response of Non-linear Rotors, XI Biennial Conf. on Mechanical Vibration and Noise, Boston, Sept. 1987.

45

G. Genta, M. Rossetto, M. Damilano, Modifiche ed aggiornamenti di una attrezzatura per prove di centrifugazione, XV Conv. Naz. AIAS, Pisa, Sept. 1987.

44

G. Genta, P.A. Miller, Un codice di calcolo per lo studio dinamico di rotori non assialsimmetrici, XV Conv. Naz. AIAS, Pisa, Sept. 1987.

43

G. Genta, A. Repaci, Unbalance Response and Circular Whirling of Nonlinear Rotors, XI ICNO, Budapest, Aug. 1987.

42

G. Genta, A. Gugliotta, Un elemento tronco-conico per lo studio dinamico dei rotori, VIII Conv. Naz. AIMETA, Torino, Oct. 1986.

41

G. Genta, C. Schips, Studio statico e dinamico di rotori su cuscinetti a caratteristica nonlineare, VIII Conv. Naz. AIMETA, Torino, Oct. 1986.

40

G. Genta, A Consistent Matrix Approach for F.E.M. Dynamic Modeling of Rotors, 3rd Conf. on Mechanical Design and Production, Il Cairo, Dec. 1985.

39

G. Belingardi, G. Genta, P. Campagna, Hybrid Composite Technology for Automotive Drive Shaft: a Computer Aided Optimization, ISATA 85, Graz, Sept. 1985.

38

G. Genta, On the Optimum Design of a Steel Flywheel for a Hybrid City Bus, XX I.E.C.E.C., Miami Beach, Aug. 1985.

37

G. Belingardi, G. Genta, P. Campagna, Composite Material Drive Shafts For Vehicular Applications, XIV Reinforced Plastics Conference, Karlovy Vary, May 1985.

36

G. Genta, Whirl Stability of Multi-Disc Flywheels, 1984 ASME Winter Annual Meeting, New Orleans, Dec. 1984.

35

G. Genta, A. Gugliotta, G. Brussino, Un modello per lo studio dinamico di rotori, VII Conv. Naz. AIMETA, Trieste, Oct. 1984.

34

C. Ferrero, G. Genta, C. Marinari, C. Ronco, Rilievo dello stato di tensione nelle razze di volani ad avvolgimento subcircolare, XII Conv. Naz. AIAS, Sorrento, Sept. 1984.

33

G. Belingardi, G. Genta, G. Regalzi, Una macchina di prova per molle di flessione in materiale composito, XII Conv. Naz. AIAS,  Sorrento, Sept. 1984.

32

G. Genta, Study of a 5 kWh Experimental Flywheel for the CNR Flywheel Energy Storage System, I Int. Symp. on Design and Syntesis, Tokyo, July 1984.

31

G. Genta, On the Design of Composite Material Thick Rim Flywheels Built by Filament Winding, XII Reinforced Plastics Conference, Karlovy Vary, May 1983.

30

G. Genta, M. Sangirardi, Experimental Evaluation of the Bending Stresses in the Spokes of Bare Filament Flywheels, II European Symposium on Flywheel Energy Storage, Torino, May 1983.

29

G. Genta, Study of a 5 kWh Experimental Flywheel for the CNR Flywheel Energy Storage System, II European Symposium on Flywheel Energy Storage, Torino, May 1983.

28

G. Genta, G. Brussino, Dynamic Behaviour of Multi - Disc Flywheels, II European Symposium on Flywheel Energy Storage, Torino, May 1983.

27

C. Ferrero, G. Genta, C. Marinari, Experimental Strain Measurements on Bare Filament Flywheels, VII Int. Conf. on Exp. Stress Analysis, Haifa, Aug. 1982.

26

G. Genta, M.M. Gola, A. Gugliotta, Design of Anisotropic Disc Flywheels: Interacting Role of Numerical and Analytical Methods of Solution, Int. Conf. on Finite Element Methods, Shanghai, Aug. 1982.

25

 G. Genta, Prove di centrifugazione su volani a media densità di energia, IX Conv. Naz. AIAS, Grado, Sept. 1981.

24

G. Genta, M.M. Gola, A. Gugliotta, Considerazioni sullo stato di tensione in dischi ortotropi in accelerazione, IX Conv. Naz. AIAS Grado, Sept. 1981.

23

G. Genta, Shape of a Wire in a Centrifugal Field - Application to Quasi Circular Bare Filament Flywheels, Failure Prevention and Reliability 1981, Hartford, Conn., Sept. 1981.

22

G. Genta, A Systematic Approach to the Design of Advanced Flywheels, ICED 81, Roma, March 1981.

21

G. Genta, M.M. Gola, A. Gugliotta, Remarks on the Stress State in Rotating Orthotropic Disks, 1980 Flywheel Technology Symposium,  Scottsdale, Arizona, Oct. 1980.

20

G. Genta, M.M. Gola, A. Gugliotta, Axisymmetrical Stress States in Orthotropic Rotating Disks, V Congr. Naz. AIMETA, Palermo, Oct. 1980.

19

A. Mondina, G. Genta, M. Sangirardi, Analisi delle tensioni in volani a razze a fili nudi, VIII Conv. Naz. AIAS, Firenze, Sept. 1980.

18

G. Genta, M.M. Gola, Stato di tensione in dischi ortotropi rotanti, VIII Conv. Naz. AIAS, Firenze, Sept. 1980.

17

G. Genta, M.M. Gola, Dynamic Problems in the Mechanical Design of Flywheel - Heat Engine Hybrid Vehicles, XVIII Int. Congr. FISITA, Amburgo, May 1980.

16

G. Genta, M.M. Gola, Dimensionamento di alberi e sopporti per volani ad alta densità di energia: problemi dinamici, VII Conv. Naz. AIAS, Cagliari, Sept. 1979.

15

G. Belingardi, G. Genta, Stato di tensione piano e stato di deformazione piano in dischi rotanti ortotropi soggetti a variazione di temperatura, VII Conv. Naz. AIAS, Cagliari, Sept. 1979.

14

G. Genta, M.M. Gola, Dynamic Behaviuor of Flywheel- Heat Engine Hybrid Vehicles, Science and Motor Vehicle, Bled, Jugoslavia, June 1979.

13

G. Genta, Il coefficiente di forma nei volani in materiale composito realizzati per avvolgimento, IV Conv. Naz. AIMETA, Firenze, Oct. 1978.

12

G. Genta, Progettazione, realizzazione e messa a punto di una attrezzatura di prova per volani ad elevata densità di energia, VI Conv. Naz. AIAS, Brescia, June 1978.

11

G. Genta, M.M. Gola, Volani in legno lamellare: caratterizzazione del materiale, calcolo delle tensioni e prove di centrifugazione, VI Conv.  Naz. AIAS, Brescia, June 1978.

10

G. Belingardi, G. Genta, M.M. Gola, Ovalization Critical Speeds in Anisotropic Rotating Disks, 1977 Flywheel Tech. Symp., San Francisco, Oct. 1977.

9

G. Belingardi, G. Genta, On the Stress State in Quasi - Circular Bare Filament Flywheels, 1977 Flywheel Tech. Symp., San Francisco, Oct. 1977.

8

G. Belingardi, G. Genta, Sul calcolo di recipienti cilindrici multistrato in materiali ortotropi assialsimmetrici, V Congr. Naz. AIAS, Sept. 1977.

7

G. Belingardi, G. Genta, Un'applicazione del principio dei lavori virtuali al calcolo di dischi rotanti in materiale anisotropo, V Congr. Naz. AIAS, Bari, Sept. 1977.

6

G. Belingardi, G. Genta, Generalizzazione del metodo di Manson per il calcolo di corpi a simmetria cilindrica in parete spessa in materiale ortotropo assialsimmetrico non lineare, II Conv. sui materiali compositi, Milano, Nov. 1976.

5

G. Genta, Rilievo  sperimentale  delle  caratteristiche  di  tenute ferrofluidiche su alberi rotanti, III Congr. Naz. AIMETA, Cagliari, Oct. 1976.

4

G. Belingardi, G. Genta, Sull'analisi delle tensioni in dischi rotanti in materiale ortotropo soggetti a variazione di temperatura, III Congr. Naz. AIMETA, Cagliari, Oct. 1976.

3

 G. Belingardi, G. Genta, Determinazione delle caratteristiche di materiali destinati alla costruzione di volani in vetroresina, IV Congr. Naz. AIAS, Roma, Sept. 1976.

2

G. Genta, Proposta di utilizzazione degli accumulatori di energia cinetica per l'alimentazione degli endoreattori a propellenti liquidi, II Congr. Naz. AIDAA, Torino, Sept. 1975.

1

G. Genta, Influenza sulla traiettoria di un veicolo spaziale a propulsione solare elettrica della interruzione della spinta al passaggio nel cono d'ombra di un corpo celeste - calcolo di prima approssimazione, II Conv. Sez. AIDAA, Torino, June 1972